Commissioning
Container by container.
Loading block configurations, testing every device and interface, and signing each unit off, with records completed in the main contractor's system.
We install, commission and maintain fire and gas systems on gas engine, landfill and biogas sites, and commission fire detection on battery storage sites. One contractor for every safety system, and faults fixed on the visit, not on a return trip.
No obligation · We reply within one working day









What we do
Why operators switch to us
Call our 24/7 emergency line at any hour and you get through to our head engineer. Around 90% of problems are resolved over the phone. If a visit is needed, an engineer is sent as soon as possible, depending on parts.
We know the signs of drifting sensors and faulty detectors inside out, so most false trips are sorted over the phone. Proper calibration stops them coming back.
Every repair is logged by site, with the last five in your portal, so we spot the pattern and fix the cause.
Our vans carry the parts that commonly fail, so most faults are fixed there and then, for parts only. We aim not to return until your next service.
The same engineers look after your sites, so they already know the layout, the panels and the quirks.
One visit, one report, one point of contact. No gaps between contractors and no passing the blame.
Captured digitally on site and with you the same day, photos included.
We cover most fire and gas systems in the UK and get trained on any we haven’t met. We only suggest an alternative when kit is obsolete or at end of life.
Featured project
One of the UK's largest flexible generation plants, built by Statera Energy with engines from Clarke Energy and INNIO.
Clients stay
Getting started
Changing contractor sounds like a big job. With us, there’s very little for you to do.
A quick call or email about your sites and what’s on them. No obligation.
Planned maintenance at a fixed price per site, per visit. Call-outs between visits are quoted for parts, labour and mileage.
First visits timed for when your current contract ends, and every visit booked with each site.
Your first visit tests every system and gives you a report and an up-to-date site drawing, all in the SA UK Portal.
Will there be a gap in cover?
No. We start the day your current contract ends, so there’s no gap and no overlap.
Can you take on our existing equipment?
Almost always. We only recommend replacing kit that’s obsolete and can no longer be serviced.
Isn’t switching a big project?
Not for you. We plan, book and track every visit. You just tell us about your sites.
Our current contractor isn’t that bad…
Then try us on a few sites first, compare, and move the rest when you’re happy.
No obligation · We reply within one working day
The SA UK Portal
Click through the four screens to take a tour of the portal




Coverage
Every dot is a site we look after. New sites usually join a route we already run, so there’s less travel on your bill and help is never far away.
Locations shown approximately.
For your procurement team
Insurance certificates and policies available on request.
Our services
Every fire and gas safety system on your sites, looked after by one contractor. Separate installation and maintenance teams mean new projects never delay your planned visits.
For procurement
Maintenance
Every system serviced in one visit by the same engineers each time, with a fixed price per site, per visit. We track when each site is due and book it in.
| Service | Standard | What’s included |
|---|---|---|
| FireFire detection | BS 5839 |
Intrusive: full shutdown, live-fire testNon-intrusive: inhibit & test |
| GasGas detection | Manufacturer’s requirements |
|
| Life safetyEmergency lighting | BS 5266 |
|
| FireFire extinguishers | BS 5306 |
|
| Life safetyEmergency stops | Function test |
|
| ReportingReports & site drawings | Same day |
|
| RepairsRepairs | Parts on the van |
CrowconAdvancedKentecApolloHoneywellHochikiVESDASensitronCranford ControlsKAC |
Installation & commissioning
| Service | Standard | What’s included |
|---|---|---|
| FireFire systems | Design & install |
|
| GasGas detection | Design & install |
|
| FireVESDA | Air-sampling |
|
| Life safetyPAVA | Voice alarm |
|
| HandoverCommissioning | Handover |
|
Thurrock Power, 95 Jenbacher engines: we installed the fire system, commissioned fire and gas, and now maintain the site.
Gas detection
The hazards we see most on energy and industrial sites. If it's not listed, ask us.
| Gas | Hazard | Where we find it |
|---|---|---|
| CH₄ Methane | Flammable | Landfill gas and biogas engines, gas trains, engine cells |
| H₂S Hydrogen sulphide | Toxic | Raw landfill gas and biogas, anaerobic digesters, gas clean-up plant |
| CO Carbon monoxide | Toxic | Engine halls and containers, plant rooms, boiler houses |
| O₂ Oxygen depletion | Asphyxiant | Enclosed spaces, containers, areas with CO₂ or inert gas |
| CO₂ Carbon dioxide | Asphyxiant | Biogas and AD plant, CO₂ suppression areas |
| H₂ Hydrogen | Flammable | BESS containers, battery rooms, hydrogen blending and electrolysis |
| LPG Propane / butane | Flammable | Start-up and backup fuel stores, kitchens, plant rooms |
Reactive cover
Call any time about a fire or gas fault:
07974 426675
Call any hour, any day, and you get through to our head engineer. Around 90% of problems are resolved over the phone there and then. If a visit is needed, we send an engineer as soon as possible, depending on parts availability.
About us
Founded by engineers, run by engineers, working on energy sites from Cornwall to Aberdeen.
Who we are
SAUK2K is a UK fire and gas detection company. Covering both makes us a favourite with energy operators, who save the cost and coordination of bringing in a second contractor.
Walter Rowe and Lee Allen met at ADT and founded SAUK2K in 2003. Today we look after more than 250 sites across England, Scotland and Wales.
Our work ranges from single-engine landfill sites to the fire and gas systems on Thurrock Power’s 95 engines.
How we're organised
Each division has its own engineers, vans and stock, so projects never pull engineers off your maintenance visits. Operations is your single point of contact.
Installations & Fire
Maintenance & Gas
Operations
Leadership
Co-founder · Head of Maintenance & Gas
25+ years in fire and gas safety, starting at ADT.
Co-founder · Head of Installations & Fire
25+ years leading installations, after starting at ADT.
Battery energy storage
Remote, unmanned and full of stored energy. Most fire contractors only cover fire. We cover fire and gas, including off-gas detection that warns of a failing cell before it becomes a fire.
Why BESS is different
A failing cell can heat up and spread quickly. Detection that works first time, every time, is the difference between a fault and a fire.
Most BESS sites have no one on site. Every panel fault needs finding and fixing properly, not reset and left. If an alarm comes in, our 24/7 emergency line puts you through to our head engineer.
Large sites run tens of containers with their own panels. Commissioning and fault-finding have to be methodical and fully documented.
Off-gas detection
A failing lithium-ion cell releases gas before it goes into thermal runaway. Detecting that gas gives you warning while there’s still time to act.
Hydrogen, carbon monoxide, carbon dioxide and flammable hydrocarbons are released. There’s no smoke yet.
Alarms and outputs to your fire panel or SCADA give operators time to isolate, ventilate and investigate.
By the time smoke and heat detectors respond, the cell is already in runaway and can spread to its neighbours.
Gas can linger in a container after an event. Our engineers carry personal gas detectors in every BESS unit, and we can advise on detectors for your own team.
As a Crowcon customer, we work with their technical team on the latest BESS detection.
What we do
Container by container.
Loading block configurations, testing every device and interface, and signing each unit off, with records completed in the main contractor's system.
Clearing panel faults for good.
Replacing line isolator bases, reconfiguring devices after cube swap-outs, reconnecting loops and clearing units of faults, working under the site's permit-to-work system.
Containers, LV and switch rooms.
Fire detection in battery containers and the LV, HV and switch rooms that serve them, plus off-gas detection for hydrogen and carbon monoxide inside the units.
Proof
We commissioned and fault-found the fire detection across all three BESS blocks at Statera’s 300 MW site.
Projects
A selection of the fire and gas work we've delivered for the UK's largest landfill gas, flexible generation and battery storage operators.
One of the UK’s largest flexible generation plants, with engines from Clarke Energy and INNIO.
Next to Thurrock Power. Fire detection commissioned and fault-found in every battery unit across three blocks, under the site’s permit-to-work system.
Fire and gas installs, planned maintenance and a fire extinguisher programme across Infinis's landfill gas sites.
Fire and gas installations, commissioning and planned maintenance across Conrad's portfolio of gas-fired flexible generation sites nationwide.
National fire companies bring us in for installs and servicing they need done properly: police and rail stations, schools and colleges, industrial and chemical plants, and nuclear sites.
Fire system work on MOD and nuclear sites, where access control, permits and planning matter as much as the install itself. Site details are not published.
Careers
Our workload doubled between 2022 and 2024. One week it’s a landfill site in Yorkshire, the next a 95-engine power station.

Why SAUK2K
Gas engine sites, battery storage, landfill and biogas plants, plus large commissioning projects, alongside regular sites you get to know well.
Your own van carrying the parts that fail most often, so you finish the job on the first visit instead of coming back.
Training led by engineers with 20+ years in fire and gas, on every system we work on.
Our installations team leader and regional leads all started as engineers here. Good people get responsibility quickly.
Reports are done digitally on site and go straight to the client portal. Visits are planned and booked for you.
Dedicated installation, maintenance and operations teams behind you, and directors who still pick up the phone.
What we look for
Useful, not essential
Roles we hire for
Planned maintenance and reactive call-outs across a region, working from your own van.
New fire and gas systems on energy and commercial sites, working with Lee and the installations team.
Cause-and-effect and interface testing on new-build plant, with records signed off device by device.
Electrically minded and keen to learn? We'll train the right person from the ground up.
Send your CV and a few lines about yourself. We read every application, even when no role is advertised.
Contact us
One site or a whole portfolio. We’ll reply within one working day. Planned maintenance is a fixed price per site, per visit.
Insurance certificates and policies available on request.
Privacy notice
What we collect through this website, why, and how long we keep it. Last updated November 2026.
This website is run by SA UK 2K Ltd, trading as SAUK2K, a company registered in England and Wales (company no. 03886716), registered office 1 The Wern, Lechlade, Gloucestershire GL7 3FF. We are the controller of the personal information described here.
For any privacy question or request, email james [at] sauk2k [dot] co [dot] uk or call 01367 253020.
We don’t use tracking or advertising cookies, and we don’t sell or share your details for marketing.
Our legal basis is either taking steps at your request before entering into a contract, performing a contract with you, or our legitimate interest in running and growing our business. For job applications, it’s our legitimate interest in recruiting.
Only the services we need to run the business, such as our website host, email provider and accounting software. They handle your information on our behalf and under our instructions. We may also share information where the law requires it.
This website loads its fonts from Google Fonts. To do that, your browser connects to Google’s servers, which see your IP address. We don’t receive or store that information.
You can ask us for a copy of the information we hold about you, and ask us to correct it, delete it, or stop or limit how we use it. Email james [at] sauk2k [dot] co [dot] uk and we’ll respond within one month.
If you’re unhappy with how we’ve handled your information, please tell us first so we can put it right. You can also complain to the Information Commissioner’s Office at ico.org.uk or on 0303 123 1113.
Tell us about your sites and we’ll come back with a fixed maintenance price per site, per visit. No obligation.